Low Pool Enclosure - Icon CLEAR KIT

ICON CLEAR KIT combines large clear surfaces in 3 mm polycarbonate with sleek anthracite-coloured profiles. The short modules make the range particularly interesting when the space behind the pool is limited.

Read more Show less

More view. Less aluminium. A more elegant pool environment.

ICON CLEAR KIT combines large clear surfaces in 3 mm polycarbonate with sleek anthracite-coloured profiles. The short modules make the range particularly interesting when the space behind the pool is limited.

  • Single rail with optional placement on the right or left.
  • 14 mm high rails and lockable modules.
  • Three models for pool sizes 3×6, 3,5×7 and 4×8 meter.
  • Choose kit or factory assembly, with the option to have the rail installed as well.

The module length is approximately 1,58–1,68 meter depending on the model. Check parking space, coping and rail length against the model's dimension drawing. Compare dimensions in the pool enclosure catalogue or contact us for help choosing the right one.

Compare ICON CLEAR KIT with other pool enclosures

Want to compare height, opening and rail solution with more models? See our low pool enclosures or the full range of pool enclosures.

3 products

ICON CLEAR KIT pool enclosure – low profile with clear panels and a single rail

ICON CLEAR KIT is a range of low, sliding enclosures for those who want to preserve the view of the water and an open feel around the pool. Large transparent panels combine with anthracite profiles and a rail along one long side. The range suits pool sizes of 3×6, 3.5×7 and 4×8 metres, with short modules that slide into one another when opened.

When choosing an enclosure, both its appearance and everyday use need to suit your garden. ICON CLEAR lets you plan for a rail-free long side and choose the direction in which the enclosure parks. Start with the pool and coping dimensions, check the surrounding space, then compare models. This helps you find a solution that still works once furniture, paths and planting are in place.

Clear-panel design with 3 mm transparent polycarbonate

ICON KIT CLEAR uses 3 mm transparent polycarbonate in the roof and end panels. “Clear glass” therefore describes the appearance; the material is polycarbonate. The large clear sections keep the water visible through the enclosure, while anthracite profiles frame the structure.

A low enclosure is particularly appealing when you want the pool area to blend into the garden and preserve sightlines from the house or patio. Height varies between sizes and between the largest and smallest modules. Compare the complete dimensional drawing when assessing how it will look at your pool.

Short modules for limited spaces

Modules in this range are approximately 1.58–1.68 metres long. This matters when planning where the open enclosure will sit, for example near a hedge, fence or terrace. The modules retract together, but module length alone does not define the full parking space. Rail position, enclosure construction and how much of the pool you want to uncover must also be considered.

Check the difference between the closed enclosure length and the rail length shown in the drawing. Allow access for opening, closing and maintenance too. Extra rail is available if you want to move the modules further behind the pool. Choose the accessory to match the number of modules.

Choose the right size: 3×6, 3.5×7 or 4×8 metres

The size in the product name refers to the pool size, not the enclosure's external dimensions. The coping, any projections and the rail-fixing area also need to fit within the solution. Compare key dimensions below; full drawings are on each product page.

ICON KIT CLEAR 3×6

The ICON KIT CLEAR 3×6 enclosure has four modules with a stated module length of 159.2 cm. According to the drawing, it is 620 cm long, 350 cm wide internally and 403 cm wide externally. The largest module is 61.5 cm high and the smallest 30.1 cm. It is the smallest model in the range, with a rail width of 28.2 cm.

ICON KIT CLEAR 3.5×7

The ICON KIT CLEAR 3.5×7 enclosure has five modules with a stated module length of 158.4 cm. It is 770 cm long, 400 cm wide internally and 467 cm wide externally. The largest module is 74.5 cm high and the smallest 32.5 cm. The rail is 35.2 cm wide according to the drawing.

ICON KIT CLEAR 4×8

The ICON KIT CLEAR 4×8 enclosure has five modules with a stated module length of 168.4 cm. It is 820 cm long, 450 cm wide internally and 517 cm wide externally. The largest module is 77 cm high and the smallest 35 cm. This model also has a rail width of 35.2 cm.

A single rail on the right or left

ICON CLEAR KIT has a rail along only one long side. Choose right or left to suit the pool area's layout. Consider which side you walk along most, where you enter the pool and how you will operate the enclosure. The rail height is 14 mm, but its width and fixing area also need to be included in your plans.

Use the model drawing when choosing the side so that right and left are interpreted consistently when ordering. The range has no side door. Plan how you will open the enclosure for pool access and where the retracted modules will sit.

Kit or factory-assembled enclosure

KIT means the enclosure can be ordered as an assembly kit. Factory assembly is available if you want the modules pre-assembled. You can also choose factory assembly together with rail installation on decking, paving or granite. Options and current prices are shown on each product page.

With factory assembly excluding rail installation, the rail still needs to be fitted on site. Check which work your chosen option includes and how the base should be prepared. The rail needs a suitable, stable base and must be installed according to the manufacturer's instructions. The pool surroundings and base construction affect installation planning.

Check these points before ordering

  • Measure the pool and coping's external dimensions, including any projections.
  • Compare these with the enclosure's internal and external widths and its closed length.
  • Check the space behind the pool and how much of the water surface you want to uncover.
  • Choose the rail position using the drawing, walkways and pool access.
  • Check the rail base and select the appropriate installation option.
  • Select any extra rail for the correct number of modules and check what the order includes.

The 3×6 drawing shows a rail length of 790 cm. For 3.5×7 it is 940 cm, and for 4×8 it is 1 000 cm. Keep these drawing dimensions separate from the optional 3 metres of extra rail. Ask us to check the overall arrangement if space is tight or you are unsure how far the enclosure needs to slide.

Frequently asked questions about ICON CLEAR KIT

How do I choose between models?

Start with the pool dimensions, then check the coping, clear space under the enclosure and room for the rail. Do not choose solely by the 3×6, 3.5×7 or 4×8 designation. Two pools with the same swimming dimensions can have different coping widths and surrounding conditions.

Do all sizes have the same number of modules?

No. The 3×6 model has four modules, while 3.5×7 and 4×8 have five. The number affects which accessory you need when adding extra rail. Use the specification and drawing for the relevant size on its product page.

Can I extend the rail behind the pool?

Yes, 3 metres of extra rail is available as an option. Choose extra rail for ICON with four modules for 3×6 or extra rail for ICON with five modules for 3.5×7 and 4×8. Check there is enough space and a suitable base for the extension.

What affects the price of an ICON CLEAR enclosure?

The price depends on model size and selected options. Compare like-for-like specifications: kit or factory assembly, any rail installation and extra rail. Current product prices and installation options are on the product pages.

How do I care for the enclosure?

Follow the manufacturer's care and operating instructions for polycarbonate, profiles and moving parts. Keep the rail clear of leaves, gravel and other obstructions, and check that the modules move as intended. Use the recommended cleaning methods for the material and follow the guidance on weather, snow and storage.

Get help choosing an enclosure for your pool

Want to compare ICON CLEAR with other designs? Browse our full range of pool enclosures or read more about ICON KIT. Our catalogues and manuals page provides information for further planning.

Contact Pooltime with the pool size, coping's external dimensions and ideally a photo of the surrounding area. Tell us how much space is behind the pool and what base you have. We can then help check the model, rail position and installation before you order.