Pool enclosure for round pool – solutions, measurements and alternatives
It is possible to protect a round pool with a pool enclosure, but the solution normally needs to be planned differently than for a rectangular pool. A sliding pool enclosure runs on parallel tracks and therefore is usually rectangular even when the pool is round. The enclosure is then sized to cover the pool's full outer diameter, the pool edge, and the area needed for tracks and fastening.
For a round pool, the right solution may be a made-to-measure pool enclosure, a larger rectangular enclosure that surrounds the entire pool area, or another approved pool cover. Which option works depends on the pool's diameter, height above ground, pool edge, and the space around the pool.
What solutions are available for a round pool?
Made-to-measure rectangular pool enclosure
The most common principle is that a rectangular pool enclosure is built wide and long enough to cover the round pool. The tracks are placed parallel outside the pool edge. This provides a stable sliding structure and makes it possible to choose between different heights, panel materials, doors, and profile colours.
Pool enclosures that cover a larger part of the pool area
If there is plenty of space, the enclosure can be sized to also cover part of the area around the pool. A taller model can provide more room to move under the enclosure, while a low pool enclosure gives a more discreet appearance. Always check the enclosure's internal dimensions, total width, and the clearance required when the sections are pushed aside.
Other pool cover for a round pool
If the site cannot accommodate parallel rails, a custom pool cover or another safety solution may be more suitable. The product manufacturer needs to confirm that the cover is intended for the pool's shape and dimensions. Compare Pooltime pool covers.
The measurements we need
- The pool's maximum outer diameter, including the pool edge or coping.
- Height above surrounding ground if the pool is fully or partially above ground.
- Clear width around the pool where rails and fittings can be installed.
- Clear length behind the pool if the roof should be able to slide completely away from the water surface.
- Base material and level, for example concrete, stone, or timber decking.
- Placement of stairs, equipment, and walkways which can affect opening direction and door placement.
Choose height, rails, and material
A low roof has less impact on the view but provides limited space under the structure. A taller roof can make it easier to use the pool area in poor weather. A model with a rail on one side can keep one walkway freer, while double rails provide guidance along both sides. Also read our guide on pool enclosure without track and single-track options.
The panels can consist of clear solid polycarbonate or insulating multiwall polycarbonate, depending on the model. The choice affects light transmission, insulation, appearance, and price. The final structure must be selected based on the model's documented properties and the conditions on site.
Frequently asked questions about pool enclosures for round pools
Does the pool roof itself have to be round?
No. A sliding roof is normally rectangular because the rails need to run parallel. The roof can still cover a round pool if its internal dimensions and placement are correctly sized.
Can a standard roof work?
In some cases, if the standard roof's clear internal dimensions cover the pool's outer diameter with sufficient margin. However, a made-to-measure roof or careful verification of a larger standard model is often required.
Can the roof be installed on timber decking?
It may be possible if the decking is stable, level, and dimensioned for fixing and load-bearing. The structure needs to be assessed before ordering.
How do I get a safe quote?
Send a dimensioned sketch and photos from several angles. Also specify the pool's height, base, and desired opening direction. Pooltime can then check whether a standard enclosure, made-to-measure pool enclosure, or other cover is the best fit.
Next step: email the details to info@pooltime.se or call 010-206 70 60.
