pool enclosure without rail – compare rail-free and single-rail options
Are you looking for a pool enclosure without a rail? Completely rail-free telescopic pool enclosures are unusual. For most residential pools, the closest and most practical option is a pool enclosure with a rail on one side and wheels on the other. This keeps one long side free of a rail, while the roof gets the guidance needed to open and close smoothly.
Pooltime offers several single-rail options. We help you compare them with traditional pool enclosures with rails on both sides and check that the dimensions, base, and opening direction suit your pool.
What is meant by a pool enclosure without a rail?
The expression is used in several ways. Some mean a completely rail-free pool enclosure. Others mainly want to avoid a rail on the side where the family walks, sits, or steps down into the pool. In the latter case, a single-rail pool enclosure often the right solution: the roof runs in a rail along one side and on wheels along the other.
It is also important to distinguish between without a rail and without a coping is the closest option. The coping is the raised edge around the pool, while the rail guides the pool enclosure sections. A pool enclosure sold "without coping" may therefore still have one or two rails.
Rail-free, single-rail, or double rails?
| Solution | Benefit | What to check |
|---|---|---|
| Completely without a rail | No fixed rail along the pool's long sides | The range is limited. Check guidance, anchoring, substructure, and how the roof is secured in wind. |
| Rail on one side | One long side is free of a rail, while the roof still gets clear guidance | The substructure on the wheel side needs to be level and stable. Check which side the rail should be on. |
| Rails on both sides | Stable and predictable movement even with heavier sections | Rails run along both long sides and need to be placed outside the pool edge. |
Pooltime options when you want as little rail as possible
Sydney - ultra-low pool enclosure with a single rail
Sydney runs on a rail along one side and is designed for a discreet profile around the pool. It suits those who want to keep the other long side clear while still having a guided, sliding pool enclosure. See an example of Pool Enclosure Sydney with a single rail.
ICON KIT – rail on one side and wheels on the other
ICON KIT is a low pool enclosure where the rail is on one side and the enclosure rolls on wheels on the other. This creates a more open walkway along the pool. See ICON KIT.
Mästare Plus – premium single-rail solution
Mästare Plus is another option for those who prioritise a low profile and a free long side. The series is available in several sizes and may also be suitable when standard dimensions do not fit. See Mästare Plus.
Custom-made pool enclosure for an unusual placement
If steps, decking, coping stones, or available sliding space make a standard model unsuitable, a made-to-measure solution may be better. Read about custom-made pool enclosures.
How to choose the right solution
- Decide which side should be free. Start with walkways, steps, seating areas, and where the pool is used most.
- Check the overall outer dimensions. Do not measure only the water surface. Coping, edging, steps, and installations affect the width the roof needs to cover.
- Measure the space behind the pool. If the roof is to be pushed completely past the pool, sufficient storage space and sometimes an extra rail are required.
- Assess the substructure. Decking, stone, and concrete need to be stable and sufficiently level for the chosen model, especially on a wheel side without a rail.
- Choose height and panel material. A low model obstructs the view less, while taller models provide more space under the roof. Multiwall polycarbonate and clear plastic have different properties for insulation, light, and appearance.
- Check safety and local regulations. Always follow the model's installation and safety instructions and check the rules that apply where the pool is to be built.
Information we need to recommend the right pool enclosure
Please send the pool's external dimensions, photos of the pool area, the base material, the desired sliding direction, and the measurement of the free space behind the pool. Also tell us which long side you want to keep free from a rail. This allows us to determine more quickly whether a standard single-rail model is suitable or whether a custom-made pool enclosure is a better choice.
Email the documentation to info@pooltime.se or call 010-206 70 60.
Frequently asked questions about pool enclosures without rails
Does Pooltime sell a completely rail-free telescopic pool enclosure?
Pooltime's current telescopic models use a rail on one or both sides. For anyone looking for a pool enclosure without a rail, a single-rail model is therefore normally the closest alternative. The range and special options may change, so contact us for a current assessment.
Is a single rail the same thing as a pool enclosure without a rail?
No. A single-rail pool enclosure has a rail on one long side and wheels on the other. The advantage is that one side of the pool can be kept free from a rail.
Can a single-rail pool enclosure be installed on a wooden deck?
It depends on the model and construction. The substructure needs to be stable, level, and designed for fixing and load. Send photos and measurements and we will help you check the conditions before ordering.
Can I get a single-rail pool enclosure in custom dimensions?
Some series can be made to measure. The possibilities depend on width, length, height, panel material, door placement, and surrounding areas. A quote request with complete measurements gives the most reliable answer.
Next step: compare the models in our pool enclosure catalogue or ask us to recommend the right solution for your pool.
