The pool enclosure is supplied as standard in a wooden crate (BOX). Pooltime offers assembly of the enclosure modules, and the position of the side door is agreed on site with the installer.
When installation is ordered, it may take up to 2–3 weeks before our installers arrive.
IMPORTANT! To install the pool enclosure, the base must be prepared according to “Pool enclosure preparation”, available in the Pooltime catalogue .
The pool enclosure weighs approximately 500 kg. The transport dimensions are approximately 5 m long, 0.5 m deep and 1.5 m high. Unloading requires a crane lorry, forklift, wheel loader or tractor.
The transport company does not allow anyone to climb onto the lorry bed to unload by hand. Please choose one of the delivery options below.
For deliveries to Germany, the transport company may use a MOFFET forklift instead of a crane lorry when crane lorry delivery has been selected.
Pool enclosure Albixon Smart 4 × 8.5
with instalment payments via Klarna/Svea
Made by Albixon – one of Europe’s leading pool enclosure manufacturers
Choose between premium 4 mm clear panels and insulating 8 mm multiwall panels
Stable 21 mm rails that are comfortable to walk on and better accommodate variations in the base, for example on timber decking
10-year colour warranty for lasting protection and an attractive appearance
Available to order
Configure product
Choose the colour, material and options for your product.
Could not load pickup availability
Albixon Smart is a sliding pool enclosure with four sections, a low profile, and a side door. The model in this product has an outer length of 860 cm and a height of 100 cm. Check the dimension drawing against your pool and coping; the size stated in the product name does not replace the actual inner and outer dimensions of the enclosure.
Design and use
The enclosure profiles are 55 × 40 mm. Depending on the selected version, it is available with 8 mm clear polycarbonate twin-wall sheets or 4 mm solid clear plastic. The construction of the twin-wall sheet and the solid clear plastic differs, so check which material is included in the variant you order.
The sliding door is fitted on the largest section and can be placed on the right or left side during installation. The sections are lockable. Rails with a length of 860 cm are included; extra rails are available as an option when you want to be able to slide the enclosure further away from the pool.
Dimensions and technical details
- Minimum internal width: 429 cm.
- Maximum external width: 471 cm.
- External length: 860 cm.
- Height: 100 cm.
- Profiles: 55 × 40 mm.
- Number of sections: 4, approximately 219 cm per section.
- Package dimensions: 561 × 55 × 127 cm.
- Stated weight: 470 kg for the standard version or 610 kg for the version with clear plastic.
Check this before ordering
Measure the pool, coping, ladder, and other protruding parts. Verify the exact inner and outer dimensions of the rails, a suitable base, and the place where the enclosure will stand when it is slid closed. Also plan for receipt and handling of the delivery.
The stated installation time is approximately 2 hours for 3 people with twin-wall sheets and approximately 4 hours for 3 people with solid clear plastic. These times are estimates and depend on preparation and conditions. Pre-assembly can be ordered at extra cost; confirm the scope and delivery time in the quotation.
Always follow the current model's installation and care instructions, including instructions for locking and load. See our catalogue and documentation, read about planning a pool with a pool enclosure, or compare more low pool enclosures.
- Dimensions: 561 x 55 x 127 cm
- Weight: 470.0 kg
